03 Series Operator’s Manual
Setup Mode • 56
when you hear the second beep.
4. If the PASS--W menu item is set to On, the following screen will appear
with the first digit flashing prompting you to enter the password.
•
Use the AIR button to scroll through the numbers 0-9 until you arrive
at the desired value, then press and release the POWER MODE
button to accept the value.
•
Repeat the above procedure for each digit.
•
When you have set and accepted the last digit of the password, the
first menu item in Setup Mode will appear, the DATE Screen.
•
If you entered the incorrect password, an error screen will appear.
You must use the POWER MODE button to turn the unit off and try
again if you wish to enter Setup Mode or turn on the unit and
proceed to Measuring Mode.
NOTE:
If you have forgotten your password, contact RKI Instruments, Inc.
5. If the PASS--W menu item is set to OFF, the DATE Screen is displayed.
6. Use the AIR button to move forward through Setup Mode. When you
get to the last menu item, the START menu item, continuing will take
you to the beginning of the menu.
7. When you arrive at the item you wish to enter, press and release the
POWER MODE button to enter that item.
PASS--W
0 0 0 0
DATE
DATE
