03 Series Operator’s Manual
Operation • 24
5. Press and release the POWER MODE button to display the Max.
Screen. This is the maximum oxygen reading taken since the
instrument was turned on.
6. If you do not want to clear the maximum reading, continue to the next
step.
If you want to clear the maximum reading, press and hold the AIR
button. After a couple of seconds, the LCD will prompt you to hold the
AIR button with the following screen.
Hold the AIR button until the following screen appears, then release it.
The maximum reading will be cleared and the unit will return to the Max.
Screen.
7. Press and release the POWER MODE button again to proceed to the
Full Scale Screen. The detection range full scale value is displayed. An
“L” or an “A” will appear under the full scale value to indicate whether
the alarms are set to latching (L) or auto-resetting (A). This setting can
be adjusted using the 03 Series User Setup Program.
MAX.
%
21.2
HOLD
CLEAR
- - - -
CLEAR
- - - -
F. S.
%
L
40.0
