Riverbed Cascade Express, Руководство по установке

Страница: 41 / 92

Cascade Installation Guide
31
Security Profile settings:*
You can use either three traffic collection profiles (weekdays,
weeknights, and weekends) or four (weekdays, weeknights,
Saturdays, and Sundays). After installation, you can define others.
You can also specify the times when weekdays begin and end (default
times are 9:00 am to 5:00 pm).
Password to use for your initial Express login:*
The default password
admin
.
New password to enter when prompted to change the
initial Express password:*
Applies only to systems not previously configured.
Remote Management Module IP address
Remote Management Module netmask
Remote Management Module gateway
Service Management
Leave this set to ByLocation unless you are requested to choose
another group type for service locations.
Note 1: Do not send more than one type of flow data to the same port.
Configuring the Express
The first time you log in to a newly-installed system, it displays an initial Setup
page. This is a one-time display. After you set up the initial configuration, you
can make subsequent configuration changes on the
Configuration pages of the
GUI.
To configure the Express, you need a separate PC and a crossover cable. This PC
must have an Ethernet port configured for TCP/IP networking. It must also be
running Mozilla Firefox or Microsoft Internet Explorer. The LAN interface
adapter settings of this PC must be set to:
•
IP Address: 192.168.1.30
•
Network mask: 255.255.255.0
•
Gateway: 192.168.1.1