![background image](http://html1.mh-extra.com/html/riverbed/cascade-express/cascade-express_installation-manual_1465706070.webp)
Cascade Installation Guide
60
6.
When prompted to log in to the Sensor-VE, use:
Login:
admin
Password:
admin
7.
When you are asked to continue, click
Yes
and answer the questions.
You will be prompted to enter the network address for reaching the Sensor-
VE and the address of the Profiler to which the Sensor-VE is to send data.
Additionally, you will be asked for your Sensor-VE license key, which was
included in the purchase confirmation email. You can enter the license key
later, if necessary, but you must enter the IP address at this time.
The dialog will appear similar to the following:
8.
After answering the configuration questions, confirm that the setup
information is correct. This causes the Sensor-VE to reboot. When the
Sensor-VE has finished rebooting, you can close the remote console window.
(Use Ctrl + Alt to exit from the console window to your main window.)
Complete the Sensor-VE setup
To configure the Sensor-VE,
1.
Point your browser to the Sensor-VE IP address that you assigned to the
Sensor-VE management interface in the remote console window.
Log in using the default account:
Login:
admin
Password:
admin
Содержание Cascade Express
