Operating Manual Version 7.3-03 of 28.07.20
28
6.3.3 Setting the Screen Contrast
(Cont)
The
Cont
menu item allows to control the picture contrast.
6.3.4 Setting the Default Screen Direction
(Save Scr)
The
Save Scr
menu item allows to save the current direction of the
picture on the screen as default.
6.3.5 Setting the Language
(Lng)
The
Lng
menu item allows to select a language (two languages are
available –
Russian
and
English
).
6.3.6 Setting the Sound Volume
(Snd)
6.3.7 Saving the Settings
(Write)
The
Write
menu item allows to save up to 5 sets of parameters
(
Dose
,
AM
,
FM
,
Dmp
,
F
,
Int
,
and
Gap
)
. To save your sets of parame-
ters in one of 5 cells, select the cell number and wait until the device exits
the Service menu. A descending beep will indicate that the settings have
been saved.
6.3.8 Reading the Settings
(Read)
The
Read
menu item allows to read the earlier saved sets of parame-
ters from the non-volatile memory (see p.6.3.7). Select the number (
1
…
5
)
of the cell that contains your presets saved earlier and wait until the device
exits the Service menu.
Optionally, devices may include up to 32 factory presets which, as com-
pared to user presets, cannot be amended by a user and are indicated by the
names instead of numbers.
A descending beep will sound and the settings will
be applied. And the energy strength will be automatically set to minimum.
The
Snd
menu item is for volume con-
trol. When
Snd 0
is set, all sounds except
for clicks while controlling the energy
strength will be disabled, and in the
‘B’
state
a corresponding icon will be dis-
played in the top line of the screen (Fig.29).
Snd 1
is for minimum sound volume,
Snd 2
–
for medium volume, and
Snd 3
–
for maximum volume.
Fig.29
