Operating Manual Version 7.3-03 of 28.07.20
18
6.2 MAIN MENU
6.2.1 Setting the Dose (
Dose
)
When
Dose Off
is set (which is indicated by a long beep), the Dos-
ing is off.
Dose 1
(indicated by a short beep) activates the
individually-dosed
mode
(hereinafter –
IDM
) with the adaptive integral criterion of deliv-
ered stimulation (
Dose
) and integral criterion of achieving the null rela-
tive dynamics (
Zero
).
Dose 2
(indicated by 2 short beeps) activates
IDM
with the differ-
ential criterion of achieving the null dynamics (Differential Dose).
Dose 3
(indicated by 3 short beeps) activates the
Screening
mode (for searching the optimal treatment places).
Dose 4
(indicated by 4 short beeps) is similar to
Dose 3
but the
data are displayed in the circle (when the screen image is horizontal).
Optional
Dose 3
and/or
Dose 4
modes can represent the labile
screening mode data (for searching skin areas with maximal reaction in a
labile mode): current reaction to the initial reaction ratio in the audio-
visual mode.
Dose 5
(indicated by a dual-tone beep) is used to carry out
electropunctural diagnostics in 24 points (6 points on each extremity)
with an add-on local electrode.
When switching between dose modes, damping switches off au-
tomatically.
After
Dose 1
or
Dose 2
has been selected, if no buttons are pressed
within 2 seconds, the device will switch to the
Dose state
(Fig.20).
a
b
Fig.20
