Operating Manual Version 7.3-03 of 28.07.20
20
Once you take the device up from the skin,
●
will change to
○
in the
top line, and all other information will stay the same on the screen.
In the
Dose state,
pressing any button resets the timer and
measurements. Moreover, touching the skin with the electrode also
resets the timer.
When switching on
Dose 3
,
Dose 4
, and
Dose 5
,
all modula-
tions and damping are switched off forcedly
.
Data displayed on the screen at
Dose 3
are shown in Fig.22, and
those for
Dose 4
are illustrated in Fig.23. In these modes after 1-second
stimulation a short beep will sound, the energy strength will decrease to
the minimal level, and the device will be waiting for the electrode to be
taken off from the skin. Once the electrode is taken off, the previously set
value of the energy is restored.
Successively applying the device on the points to be treated, you can
get up to 8 results of initial measurements on the screen.
Fig.22
Every next measuring, its results are displayed in the next line. For
Dose 3
the results of the 8
th
measuring will be displayed in the 8
th
line,
and those of the 9
th
measuring will be displayed again in the in the 8
th
line.
So, all previous lines will as if move one line upwards. So, in the
Dose 3
screening mode, the screen displays the results of initial measurements for
the latest 8 points.In
Dose 4
horizontal and vertical data display are dif-
ferent.
