Operating Manual Version 7.3-03 of 28.07.20
13
4 DEVICE COMPONENTS AND CONTROLS
4.1 The device is illustrated in Fig.14. The device has an upper cover 1
with a screen 8, case with a built-in electrode 9 and a battery cover 2. All
components except for the batteries are located on the printed circuit
board inside the device’s case.
4.2 The LCD screen 8 displays the results of measuring, settings and
device’s state.
Fig.14
4.3 The device has the following controls on the upper side 1 of its case:
button 3 (
–
) is used to decrease the energy strength or value
of a selected parameter;
button 4 (
) is used to select parameters and exit the standby
mode;
button 5 (
+
) is used to increase the energy strength or value
of a selected parameter;
button 10 (
) – is used to rotate the picture on the screen.
4.4 The lateral surface of the case has a switch button 6 to switch
on/off the device and plug 7 for connecting add-on electrodes.
4.5 The device is powered from 4 alkaline batteries (AAA Type).
