Operating Manual Version 7.3-03 of 28.07.20
21
Initial reaction on the current
route
Maximum reaction on the
current route
Maximum reaction of all
routes
Current reaction to the initial
reaction ratio scale
Initial reactions on the route
a
b
Fig. 23
For horizontal display (Fig.23a), measurements are displayed in a
circle clockwise, beginning from the upper position (10 positions in all).
The results of the 11
th
measurement will be displayed in the position of
the first measurement, and so on.
For vertical display, measurements are displayed in a column like in
Dose 3
, but the data of 16 measurements are displayed and they remain
in their constant positions.
(Optional)
Dose 3
and/or
Dose 4
modes can represent the labile
screening mode data (for searching skin areas with maximal reaction in a
labile mode): current reaction to the initial reaction ratio in the audio-
visual mode (Fig.23b). First line shows initial reaction on the current
route, second line shows the maximum reaction on the current route
and 3-rd line shows the maximum reaction of all routes.
Interpretation of ratio scale of the initial and current reactions on
the route indication is shown in the table below:
The current to the
initial reaction ratio
Indication
ratio
< ½
no indication by color
½ <=
ratio
< 1
one stripe (blue) displayed
1 <=
ratio
< 1½
Two stripes (blue+green) displayed
1½ <= ratio
< 2
Three stripes (blue+green+yellow) displayed
and the device emits a single beep every second
2 <=
ratio
Four stripes (blue+green+red) dis-
played and the device emits double beep eve-
ry second
