Operating Manual Version 7.3-03 of 28.07.20
15
If you performed all the operations mentioned above in this item and
the device works as described, the device is ready to be used for therapy.
Otherwise, refer to the Chapter 8 (Troubleshooting).
5.5 Switch off the device using the switch button.
6 USING THE DEVICE
6.1 GENERAL INSTRUCTIONS
6.1.1 When manipulating the device, observe the indications on the
screen and beeping.
6.1.2 A chart of the device’s basic states is illustrated in the Fig.18
(dotted lines mean that the
Dose
is on).
Fig.18
After being switched on, the device is always in the
‘B’ state
. In
the
‘B’ state
the device will stimulate at the settings displayed on the
screen. Use the
+
and
–
buttons to control the energy strength of stimu-
lation. Use the
button to switch the device to the
Menu state
.
In the
Menu state
you can set all parameters except for the energy
strength. For detailed description of these parameters see the items 6.2.1-
6.2.9. A current parameter is highlighted inversely. Use the
+
and
–
but-
tons to change the current parameter’s value. Use the
button to move
down the menu, use the
button to move up the menu. If no buttons are
