Operating Manual Version 7.3-03 of 28.07.20
22
Moreover, if the current reaction exceeds the previous maximum,
this is indicated by a
clicking sound
.
Attention!
In fact there is a double indication: a relative value of cur-
rent reaction to initial one – in the screen and by sounds,
and an absolute maximum of reaction – by
clicks
.
Dose 5
is intended for estimating the
state of 24 meridians that make 12 pairs. In
this case a special local electrode shall be
used (Fig.24).
The energy strength shall be set
before
switching to
Dose 5
as it cannot be
changed in this mode.
When
Dose 5
is switched on, the screen will
display a matrix of 24 values in 4 columns: 6 –
Fig.24
for the left hand, 6 – for the right hand, 6 – for the left foot, and 6 – for the
right foot. The columns are named respectively: lH, rH, lF, rF (Fig.25). In
this mode the picture on the screen cannot be rotated.
To select a point to be measured, use
+
and
–
buttons (the selected
point will be highlighted). The measurement is made during 1 sec after
the electrode contacts the skin, and the measured value appears in the
highlighted matrix entry, and the energy strength decreases to the mini-
mum. Once the electrode is taken off from the skin, the previously set
value of the energy is restored.
To view the measurements as a graph (Fig.26), press
button. To
return to the matrix, press the button once again.
To quit
Dose 5
, press
button.
Fig.25
Fig.26
For detailed description of treatment in Dosing modes see recom-
mendations for treating in the individually-dosed mode in the Instruction
for Use provided with your device.
