Riso RZ200AW, Руководство пользователя

Страница: 32 / 112

Basic Operations
Basic Operations
30
Printing with Data Generated by a Computer
(Optional Kit Required)
1
Set the power switch to (ON) to
turn the power on.
The power switch is located on the lower right side
of the machine.
: Power On
: Power Off
Important!:
• When the machine is in the Energy Saving
mode, the key is lighted. Press the key to
wake up the machine.
2
Check that the indicator is on.
If the indicator is off, press the key.
3
Check the paper and cylinder(drum)
color.
To change the paper or cylinder(drum) color,
replace the paper on the Paper Feed Tray or
replace the color print cylinder(drum) as needed.
4
Send document data from the com-
puter.
While the machine is receiving data, the indi-
cator blinks.
When receiving is completed, the master-making
process is started.
Important!:
• You cannot make various settings including
image processing mode, by operating the
machine. Only the printer driver allows such
settings. For details, see the user’s guide of the
printer driver.
Note:
• You can also use the printer driver to stop the
master-making or printing process at any point.
For details, see the User's Guide of the printer
driver.
• By checking which Progress Arrow segments
light or blink, you can identify at which status
the machine is stopped.
) p.29
When the machine has been halted with
Progress Arrow segments blinking, it is waiting
for a start instruction. Press the
key to
resume the process indicated by the blinking
arrow segments.
• If you press the key when the machine is not
in use after the master-making process or when
you stop the machine during printing, the page
number currently being printed will be displayed
in Print Quantity Display.
Tip:
When the computer sends document data, the
machine automatically receives it and starts the
master-making process. It is judged whether or
not the machine is in use, based on how much
time elapsed after any key had been pressed last
or printing had been finished.
This time period is called the “Reservation
Period”.
You can change the initial setting for the occupied
time in the Custom Setting mode.
) p.57
Basic Operations
Basic Operations
31
Riso Kagaku Technical Training Center Version