Rinnai aiM 115, Руководство пользователя и инструкция по установке

Страница: 35 / 66

31
Requirements and conditionst
Maximum length of the drain pipe for a single boiler
Model System
Dimensions
(mm)
Connection type
Maximum
equivalent length
(m)
Equivalent
length of 90 °
bend (m)
Equivalent
length of 45 °
bend (m)
aiM-65
Split chimney Ø100 B23, B33 77 2.30 3.70
Split chimney Ø130 B23, B33 325 1.80 4.40
Split chimney Ø150 B23, B33 325 1.70 4.00
Split chimney Ø200 B23, B33 325 3.70 5.70
Coaxial flues Ø100/150
C13, C33, C43, C53,
C63, C83, C93
26 1.30 2.20
aiM-85
Split chimney Ø100 B23, B33 75 2.30 3.70
Split chimney Ø130 B23, B33 317 1.80 4.40
Split chimney Ø150 B23, B33 317 1.70 4.00
Split chimney Ø200 B23, B33 317 3.70 5.70
Coaxial flues Ø100/150
C13, C33, C43, C53,
C63, C83, C93
25 1.30 2.20
aiM-115
Split chimney Ø100 B23, B33 32 2.30 3.70
Split chimney Ø130 B23, B33 151 1.80 4.40
Split chimney Ø150 B23, B33 151 1.70 4.00
Split chimney Ø200 B23, B33 151 3.70 5.70
Coaxial flues Ø100/150
C13, C33, C43, C53,
C63, C83, C93
11 1.30 2.20
aiM-150
Split chimney Ø100 B23, B33 26 2.30 3.70
Split chimney Ø130 B23, B33 125 1.80 4.40
Split chimney Ø150 B23, B33 125 1.70 4.00
Split chimney Ø200 B23, B33 125 3.70 5.70
Coaxial flues Ø100/150
C13, C33, C43, C53,
C63, C83, C93
9 1.30 2.20
Sizing of the single heat generator flue system
The adequate diameter of the flue system of an installation
is determined by its length and the number of changes of
direction. Too small a diameter can cause problems.
Please refer to the following table for the choice of diameter
correct. The table shows the maximum lengths with thermal
generators of different power and with drain systems to
different diameters.