Rinnai aiM 115, Руководство пользователя и инструкция по установке

Страница: 13 / 66

9
Range overview
Description of the function keys
Control on the machine
The range of heat generators Rinnai aiM
is equipped with a display of interface on
the machine.
Description of the function keys
In this paragraph they will come briefly
explain the functionality of individual
buttons on the panel of control.
DOMESTIC HOT WATER
mode selection button
HEATING
mode selection button
INFO button
CONFIRM button
CHIMNEY SWEEP
function button
EXIT
function button
MANUAL function button Selection
knob
Mode selection button heating
By pressing the relative side key
you can select the mode of heating;
depending on your choice performed, a
black line will appear below the relevant
symbol on the display.
Auto function
The Auto function controls the ambient
temperature as a function of time
programming which is done on the
control panel and the antifreeze
protection functions are activated.
The system is able to lead back to the
correct season, summer or winter, by
activating the ECO function.
The set point temperature will be in
any case compliant with the Comfort or
Reduced functions.
Comfort or Reduced function
When Comfort or Reduced function is
activated the heat generator guarantees
over time the conditions set by these
functions.
Sun symbol: Function Comfort,
or Comfort set point, in heating
Moon symbol: Function
Reduced, or Reduced set
point, in heating
These functions, if activated, will
not follow an hourly but continuous
programming (24 hours a day) and the
frost protection is active.
The system is able to lead back to the
correct season, summer or winter, by
automatically activating or deactivating
the heating.
Standby function
When the Standby function is active,
the heating system comes automatically
deactivated, but the antifreeze functions
remain active. The system is capable
of fall back to the correct season,
summer or winter, by activating the ECO
function.
ECO function
The ECO function is used for bring the
heating system to current season, to
switch the heating and deactivate it in
the course of the year, depending on
the temperature external. In automatic
operation (AUTO), this switching takes
place automatically, so there is no need
for the user to do so manually.
The summer / summer switching
function winter turns off the heating
when the outside temperature exceeds
the set switching temperature and turns
on again when the temperature drops 1
° C below the set value.
Hot water selection button sanitary
This button is used to activate or
deactivate the production of domestic
hot water. When this function is active,
the specific symbol appears on the
display.
The production of domestic hot water
is active or can be activated even if the
boiler is in standby or if all the circuits
are disabled or in vacation mode.
Selection knob
The selection knob is mainly used
for getting around within the various
menus present in the electronics
of the generator and for modify the
parameters.
If the boiler is in AUTO mode, the knob
allows the end user to change the set
point temperature COMFORT function.
By pressing the OK button and selecting
the circuit in which you want to perform
the change you can also set the
Reduced set point temperature.
Information
Each time it is performed
a modification, it is
recommended to wait about
two hours, to allow the
environment to adapt to the
new ones conditions.
Buttons
On the sides of the knob there are two
keys:
•
OK, to confirm the modification of a
parameter;
•
ESC, to exit from a menu or from
a parameter without saving the
changes made.