Rigol DS 5000C Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 122

Rigol DS 5000C Скачать руководство пользователя страница 66

RIGOL

Key Points for Storage System
Factory Setup:

The oscilloscope is set up for normal operation when it is shipped

from the factory. You can recall the factory default setup any time you want to
operate the oscilloscope using or starting from the factory default settings.

Waveform:

You can save 10 waveforms of two channels and 10 settings in the

nonvolatile memory of the oscilloscope and overwrite previously saved contents
as needed. By default, the oscilloscope saves the setup each time it is powered
off. The oscilloscope automatically recalls this setup the next time it is powered
on.

Load:

The stored waveforms, setups and factory setup can be recalled out.

Save:

Store existing waveforms or setups.

NOTE:

　

•

The

Save

stores not only the waveforms, but also the current settings of the

oscilloscope

•

The user should wait at least five seconds before turning off the instrument if the

settings are changed. This ensures the setup be saved properly. The oscilloscope
can store 10 settings permanently and can restore at anytime.

Copyright 2004 Rigol Electronic

2-40

User Manual for DS5000 Series

«
...
64
65
66
67
68
...
»

Содержание DS 5000C



























































































































Отзывы:

Нет отзывов