Rigol DS 5000C Скачать руководство пользователя страница 46

Страница: 46 / 122

RIGOL

Marks and status bar

①

This mark displays the trigger position in the memory.

②

The mark “[ ]” represent the current waveform window’s position in the

memory.

③

This mark displays the trigger position in the waveform windows.

④

Status bar displays the horizontal time base (main time base).

⑤

Status bar displays the trigger’s horizontal offset according to the center of the

window.

Key Points
Y-T:

The conventional oscilloscope display format. It shows the voltage of a

waveform record (on the vertical axis) as it varies over time (on the horizontal
axis).

X-Y:

XY format displays channel 1 in the horizontal axis and channel 2 in the

vertical axis.

Time/Div:

Horizontal scale. If the waveform acquisition is stopped (using the

RUN/STOP button), the Time/Div control expands or compresses the

waveform.

Roll Mode Display:

When the Time/Div control is set to 50 ms/div or slower and

the trigger mode is set to Auto, the instrument enters the rolling acquisition
mode. In this mode, the waveform display updates from left to right. There is
no trigger or horizontal control of waveforms during rolling mode.

2-20

User Manual for DS5000 Series

Содержание DS 5000C



























































































































Результаты поиска

Содержание DS 5000C

Отзывы:

Rigol DS 5000C, Руководство пользователя, Страница: 46 / 122

Результаты поиска

Содержание DS 5000C

Отзывы: