Rigel 62353 PLUS Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 85

Rigel 62353 PLUS Скачать руководство пользователя страница 15

-

11 -

|

Page Rigel Medical

62353+

user Manual V1.4

From this menu, the user is able to View a test sequence by pressing the View button
(F4). Default test settings cannot be altered at any stage.

To Copy or Delete an existing or default test sequence, use the Up & Down arrow keys

to highlight the test sequence and press the

button (F2).

Use the Up & Down Arrow keys to select the required action and press the

(F4) to confirm. Press Escape (F3) to cancel and return to previous screen.

Copied Test Sequences will appear in the list with an *pre-fix. All Copied test
Sequences can be edited. See 3.1.3 for more on editing test sequences.

Delete Sequence will remove the highlighted test sequence from the memory of the
Rigel 62353 Plus.

Default Test Sequences cannot be Deleted.

2.1.3 Modifying (Edit) Existing Test Sequences

Preset test sequences cannot be modified by the user, however alterations are possible
by producing a copy of the default test setting (see 2.1.2).

Non-default Test Sequences can be modified from the Test Sequences menu. When

non-default Test Sequences are highlighted, the

(F4) will appear in the menu

screen.

«
...
13
14
15
16
17
...
»

Содержание 62353 PLUS






















































































Отзывы:

Нет отзывов