Riello Family PRO 42 IS Скачать руководство пользователя страница 8

Страница: 8 / 76

The boiler control panel functions as an interface, displays

system information and provides access to the parameters.

The center of the main screen displays the temperature of the

domestic hot water sensor, unless there is a request for heat in

progress, in this case the supply temperature from the boiler is

displayed.

The value expressed in psi refers to the system’s water pressure.

The top of the screen shows the information regarding the

current date and time, as well as the outdoor temperature, if an

outdoor temperature sensor is provided.

On the left and right sides of the display are the icons indicating

the status of the system; their meaning is as follows.

This icon indicates that the OFF operating status mode has been set. Each ignition request is ignored except for the

anti-freeze function. The pump anti-seize, 3-way valve anti-seize and anti-freeze function remain active.
This icon indicates that heating mode has been selected (HEATING function enabled). If a heating request from a

thermostat is in progress, the icon will be flashing.
This icon indicates that the circuit for domestic hot water production is enabled. When a domestic hot water

request is in progress, the icon flashes.

- In a system with an indirect tank: if the time switch programming is in the setback mode the icon presents crossed

- In a system with a combination: the P at the top of the domestic hot water icon indicates that the boiler pre-

heating function is enabled; the P when flashing indicates that a pre-heating request is in progress.

When the “central heating time switch programming” is enabled this icon indicates that the heating system is in

AUTOMATIC mode (the management of the heating requests follows what has been set with the timer).

If the heating function is not enabled during the current time frame, the icon will be crossed out.
When the “central heating time switch programming” is enabled this icon indicates that the heating system is in

MANUAL mode (the management of the heating requests does not follow what has been set with the time switch

programming, but it is always active).

OFF

This icon indicates, when the “central heating time switch programming” is not enabled, that the system has been

set to off (not active).

This icon indicates that the system is detecting the presence of a flame.

This icon flashing indicates the presence of an error.

The front control display is equipped with a “Color Bar”, which

quickly informs the user about the operation of the boiler.

Operating states and errors are grouped according to 4 colors:

- GREEN: regular functioning, the system is serving DHW/CH

or automatic functions such as antilegionella, antifreeze,

chimney sweep etc.

A sliding text describes the active function in real time.

- YELLOW: potentially solvable error that allows, even partial,

operation of the product. A triangle icon on the display gives

access to fault details such as “call for service”, error of the

DHW sensor, etc.

- RED: presence of blocking error requiring the presence of

licensed service technician. A triangle icon on the display gives

access to fault details such as “stop for service”, final stop, etc.

- GRAY: the system is ready to serve any requests or functions,

no error detected.

By pressing the buttons “UP” and “DOWN” it is possible to choose

from the following options:

- PLANT (system): a scrolling message on the display can indicate

the temperature of the domestic hot water sensor rather than

the supply sensor of the boiler

• STATE (when the SYSTEM SCREEN is selected): to set the status

of the boiler (OFF, DHW mode or CH & DHW mode) and, when

managed by the room thermostat, the operating mode of the

FRI

13/10/2017

12:17

INFO

SET

PLANT

HOT WATER TEMPERATURE

STATE

107

°F

18.85 psi

STATE

SET

INFO

PLANT

HOT WATER TEMPERATURE

FRI

CONFIRM

CANCEL/BACK

DOWN

5.2

Boiler front control

main area in heating mode (ON/OFF if the time schedule is

disabled, AUTO according to hourly programming, MANUAL or

OFF if programming timing is enabled)

• SET: to establish the heating or hot water setpoint value or for

activating preheating

• INFO: to display the value of the system variables

• MENU: to access the system’s configuration menus

The configuration MENU is organized with a multi-level tree

structure.

With the “ENTER” button you can access the selected sub-menu,

with the “UP” and “DOWN” buttons it is possible to navigate

through the sub-menus, while the “BACK” button takes you

back to the previous level.

An access level has been fixed for each sub-menu: USER level,

always available; TECHNICAL level, password protected.

On the next page is a summary of the MENU tree structure of the

boiler control panel.

NOTICE

: some of the information might not be available on the

boiler control panel

depending on the access level, the status of

the boiler or the system configuration.

Содержание Family PRO 42 IS













































































Результаты поиска

Содержание Family PRO 42 IS

Отзывы:

Похожие инструкции для Family PRO 42 IS

Бренды по названию

Популярные бренды

Riello Family PRO 42 IS, Инструкция по установке и эксплуатации для подрядчиков

Результаты поиска

Содержание Family PRO 42 IS

Отзывы:

Похожие инструкции для Family PRO 42 IS

Бренды по названию

Популярные бренды