Riello Family PRO 42 IS Скачать руководство пользователя страница 56

Страница: 56 / 76

11.23

Error history

The error history function is automatically enabled only

after the boiler has been powered up for at least 2

consecutive hours, during this period of time any errors

that arise would not be saved in the “ERROR HISTORY”.
The errors can be displayed in chronological order, from

the most recent to the oldest, up to a maximum of 50

errors; to display the error history:

- access the technical parameters as explained in the

section “11.6 Access to the technical parameters”

- select ERROR HISTORY with the “up” and “down” buttons,

confirming the selection by pressing the “ENTER” button.

TECHNICAL

INSTALLER

CALIBRATION

RANGE RATED

COMBUSTION ANALYSIS

EXHAUST PROBE RESET

ERROR HISTORY

EXHAUST PROBE RESET

COMBUSTION ANALYSIS

CALIBRATION

RANGE RATED

ERROR HISTORY

TECHNICAL

INSTALLER

- scroll through the error history with the “up” and “down”

buttons; for each error a sequential number is displayed, an

error code and the date and time the error occurred.

1 - 10:30 18/11/2013

FAN ERROR

E030

USE ARROW KEYS

TO SEE OTHER ANOMALIES

FAN ERROR

USE ARROW KEYS TO SEE OTHER

ANOMALIES

It is possible to return to the start page at any time by

continually pressing the “BACK” button for at least two

seconds at a time.
Note: once enabled, the error HISTORY function can no

longer be disabled; there is no procedure for resetting the

error history.

NOTICE

: If an error repeats consecutively, it is saved only once.

11.24

Indirect tank configuration

(heating only

boiler)

- A

ccess the technical parameters as explained in the

section “11.6 Access to the technical parameters”.

- Select HW TANK with the “up” and “down” buttons,

confirming the selection by pressing the “ENTER” button.

18/05/2013

12:17

INFO

SET

°F

FRI

HOT WATER TEMPERATURE

STATE

PLANT

STATE

SET

INFO

PLANT

HOT WATER TEMPERATURE

FRI

- Choose between the following options: REMOVE HW TANK

and HW TANK TYPE.

18/11/2013

12:17

FRI

SETTINGS

SELECT OPTION

TIME SCHEDULE

SETTINGS

TIME SCHEDULE

SELECT OPTION

FRI

REMOVE HW TANK

This function is used to disable the operation of the indirect

tank; disabling the indirect tank, its configuration menu is

no longer accessible.

HW TANK TYPE

The parameter is used to set the indirect tank type.

Set 0 (default value) to select an indirect tank with an

aquastat.

Set 1 to select an indirect tank with an indirect tank sensor.

11.25

Temporary switch-off

In the event of temporary absences (weekends, vacations, etc.)

set the status of the boiler to OFF .

BOILER

OFF

HOT WATER ONLY

HEATING AND HOT WATER

OFF

HOT WATER ONLY

HEATING AND HOT WATER

BOILER

While the electrical supply and the fuel supply remains active,

the boiler is protected by the following:
- heating anti-freeze: this function is activated if the temperature

measured by the supply sensor drops below 41°F (5°C). A heat

request is generated in this mode with the ignition of the

burner at minimum output, which is maintained until the

outlet water temperature reaches 95°F (35° C);

- domestic hot water anti-freeze: the function starts if the

temperature measured by the DHW NTC sensor falls below 41°F

(5°C). A heat request is generated in this mode with the ignition

of the burner at minimum output, which is maintained until

the outlet water temperature reaches 131°F (55° C).

domestic hot water anti-freeze (only if indirect tank

connected): the function starts if the temperature measured

by the indirect tank sensor falls below 41°F (5°C). A heat request

is generated in this mode with the ignition of the burner at

minimum output, which is maintained until the outlet water

temperature reaches 131°F (55° C).

The activation of the ANTI-FREEZE function is indicated by a

scrolling message on the foot of the user interface display.

- circulator anti-seize: the circulator activates every 24 hours of

stoppage for 30 seconds.

11.26

Switching off for long periods

If the Family PRO boiler is not used for a long period of time, the

following operations must be carried out:

- set the status of the boiler to OFF

- set the system’s main power switch to “OFF”

- close the fuel and water taps of the heating and domestic hot

water system.

In this case, the anti-freeze and anti-seize systems are

deactivated. Drain the heating and domestic water system if

there is any risk of freezing.

Содержание Family PRO 42 IS













































































Результаты поиска

Содержание Family PRO 42 IS

Отзывы:

Похожие инструкции для Family PRO 42 IS

Бренды по названию

Популярные бренды

Riello Family PRO 42 IS, Инструкция по установке и эксплуатации для подрядчиков

Результаты поиска

Содержание Family PRO 42 IS

Отзывы:

Похожие инструкции для Family PRO 42 IS

Бренды по названию

Популярные бренды