EM-1010 computerized Embroidery Machine Operation Manual V2.0
37
Part 18 System Test
The operation is mainly for maintenance personnel, and is used to test whether the
operation of machine is normal.
In machine operation interface, press
key to enter into test interface.
18.1 Input Test
In test interface, press
key to enter into input test. Check whether each item is
changed along with the variation of status changing. If it is not changed, current input signal
may have fault. Please check and make maintenance.
18.2 Output Test
In test interface, pres
key to enter into output test. Press
key
corresponding to every test item, check whether the output is valid. If corresponding
equipment output has no action, the current output may have fault. Please check and make
maintenance.
Crocheting test: Press the key once, and the crocheting cutter is taken alternative action
between stretching and reverse returning.
Trimming test: Press the key once, and trimming motor is taken alternative action
between half circle rotation to stop and another half circle rotation on the same direction to in
place.
Buckling test: Press the key once, and the buckling electromagnet is actuated for 2s and
disconnected automatically.
Left tinsel test: Press the key once, and the tinsel landing chassis executes descending,
output for 3 times and lifting.
Right tinsel test: Ditto
