EM-1010 computerized Embroidery Machine Operation Manual V2.0
14
4.3-3 Return to Origin (Starting Point)
In the embroidering process, if it is required returning to the origin to re-start the
embroidering, it can take the operation.
Pres
key and the system will pop up “Terminate embroidering and return to the
origin?” Press
key and the taboure is moved to the embroidery card origin and
stop. AX/AY coordinates are cleared.
4.3-4 In and Out Tabouret Operation
In the embroidering process, if is required returning to the offset point, it can take the
operation.
Press
key once and the taboure is moved to the offset point and stop. Press the
key gain, the taboure is moved to stop point and stop and it can continue embroidering.
4.3-5 Return to Stop Point
In the embroidering process, after taboure is moved manually, when it is required
returning to the stop position of embroidery machine, it can take the operation.
Press
key to take operation of returning to the stop point. After the key is pressed,
it is moved to the manual frameshift position automatically and stopped.
4.3-6 Set Color Changing
Color changing setting includes color changing sequences setting and needle bar
replacement.
In working interface, press
key to enter into color changing interface. It defaults to
enter into color changing sequences operation, as in the following Fig.
