EM-1010 computerized Embroidery Machine Operation Manual V2.0
1
Part 1 Control System Introduction
1.1 System Overview
Thank you for using computer embroidery machine control system of our company!
The system can be collaborated with various kinds of embroidery machines for using to
satisfy different requirements of embroidery. It has satisfactory effects for thin material,
thick material and three-dimensional embroidery!
Advanced DSP control technology enables the system speed faster. Furthermore, the
system has friendly man-machine interface and has improved the production efficiency
effectively. The control system adopts smooth curve speed, and enables the mechanical
operation more stabled. Additionally, it reduces noise of complete machine and prolongs
mechanical service life!
Before using the machine, please read the operation manual carefully to ensure correct
using of the system.
Please keep the operation manual properly for easy reference.
As configuration varies, some machines do not have partial function listed in the manual.
Details of corresponding operation function shall prevail.
1.2 Precautions
Please don’t take maintenance and commissioning for electrical system by
non-professional personnel, which may reduce safety performance f equipments, enlarge
accident, or even cause personnel injury and property loss.
Some parts in the case may have high voltage. After powering on the system, please don’t
open the case cover to avoid causing accidental injury.
Please replace protective tube according to the product identification requirements strictly
to ensure personnel and property safety.
Power switch of the product has over-current protection function. If over-current
protection switch is actuated, it must be closed again after 3 minutes.
