EM-1010 computerized Embroidery Machine Operation Manual V2.0
17
When combined tinsel number is not set completely, the residual shall be output with
automatic cycling according to current setting sequences.
The size of A/B tinsel is determined by embrordery parameters.
Max tinsel diamter of machine cannot be larger than the tinsel size of embroidery card.
4.3-7 Change Working Mode
In working status interface, press
key to change working mode. Change one
mode when processing the key once (cycle changing) and the key display is changed along
with it. The working modes are
automatic color changing and automatic lifting mode,
automatic color changing and manual lifting mode and
manual color changing
and manual lifting mode successively.
In manual color changing and manual lifting mode, set color changing seuqnces are
invalid.
It still is modified mode after the machine is shut off and powered on again.
4.3-8 Embroidering Mode Switching
Embroidering mode switching is mainly to achieve compensation operation. The user
can move the embroidery needle to specified location via air embroidering.
In working status interface, press
key to change embroidering mode. Change one
mode when processing the key once (cycle changing) and the key display is changed along
with it. The embroidering modes are
normal embrordering,
low speed empty
stitch embroidering,
high speed empty stitch embroidering and
positioned
