EM-1010 computerized Embroidery Machine Operation Manual V2.0
39
Part 19 System Information
In main menu interface, press
key to enter into system information interface.
19.1 System Number and Version Information Checking
It is used to check the code of control system.
In system information interface, press
key to check.
18.2 System Update
It is used to update software version of control system.
In system information interface, press
key to start update operation. Take update
operation according to prompts.
It cannot appear power failure during update process.
Update is completed for about 3 minutes, and the system is skipped to working interface
automatically.
Update may clear current embroidery file. Please complete current embroidery before
update.
Shortcut updates program operation. After the machine powered in and displayed LOGO
for 5s, press
key twice and
key twice immediately. The upper part of display
displays a prompt dialogue: “Update software, Start Key Update, Stop Key Exit.” Press
“start” key to update and “stop” key to exit.
Shortcut updates map depot operation After the machine powered in and displayed
LOGO for 5s, press
key for three times immediately. The upper part of display
displays a prompt dialogue: “Update picture, Start Key Update, Stop Key Exit.” Press “start”
key to update and “stop” key to exit.
