EM-1010 computerized Embroidery Machine Operation Manual V2.0
3
Earthing resistance shall be less than 100 ohm, conductor length shall be within 20m and
conductor cross-section shall be greater than 1.0 mm2.
1.5 Operation Panel and Key Function Introduction
1.5-1
Key Function Introduction
Manual trimming key: take manual trimming in operation status and preparation
status.
Spindle jogging key: Press the key and job the spindle to 100 degree.
1.5-2 Icons Description of Touch Keys
Selection key: Used to select frameshift and lifting spindle speed.
Up, down, left and right keys: Move tabouret in embroidery card
and preparation status.
Lifting spindle speed key: - key for deceleration, and + key for acceleration.
Set the start point and walk the surrounding of pattern.
Origin operation key
Offset point operation key
Working mode switching key (automatic color changing, automatically starting
embroidering way)
Manual color changing key, left side displays current needle position and right side
displays spindle degree.
