EM-1010 computerized Embroidery Machine Operation Manual V2.0
13
180° automatically, and other taboures are not changed.
4.3 Working Status
In working status, it can take embroidery card origin (starting point) setting, embroidery
card origin returning, offset point returning, stop point returning, color changing sequences
setting, spindle jogging, manual trimming, working mode changing, embroidering mode
switching, embroidery card contour, embroidery range checking and embroidering point
returning operation in power failure.
4.3-1 Embroidery Card Origin (Starting Point) Setting
In working status, move the taboure to required embroidery card origin (starting point).
Press
key to take origin setting. The taboure walks along the max range of embroidery
card. If the position is insufficient, it modifies the origin (starting point) automatically. After
being modified, it prompts error if the position is still insufficient. After the origin (starting
point) is positioned, AX/AY coordinates are clear.
If current embroidery card is in embroidering process, it will pop up a prompt box.
Operate according to the requirements.
4.3-2 Offset Point (Highest Point of Tabouret Center) Setting
Offset point is mainly for conveniently embroidery material drawing and releasing and
applique placement.
In “Other Parameters” of “Embroidery Parameters”, set “Automatic offset out of taboure’
as “Yes”. After it is set properly, the taboure returns to embroidery card origin to start
embroidering after start-up every time. After the embroidery is completed, it is out of the
taboure and stops at the offset point.
Offset out of the taboure depends on the set dimensions of taboure, and it is deviated to
the highest position of currently selected taboure automatically.
