EM-1010 computerized Embroidery Machine Operation Manual V2.0
12
X/Y replication number: 1-99
X/Y direction space: 0-±999.9mm
The control system takes mm as unit. It is input in 0.1mm when inputting digits, i.e. it
shall input 1000 when inputting 100mm.
X/Y compensation (satin stitch): 0-±0.3
4.2-2 Switch Tabouret
In embroidery card parameter setting interface, press the input box behind
to enter
into tabouret switching operation, as in the following Fig.
Select current embroidery used taboure type. When hat frame and A-G taboures are
selected, the taboure will search absolute origin automatically, and stop at center of selected
taboure. Please pay attention to the taboure movement.
See
Taboure Setting
on embroidery range of hat frame and A-G taboures
Other taboures don’t take absolute origin searching. Embroidery range is also confirmed
by software limits setting (See
Software Limits Setting
on detailed operation).
Select interface behind taboure and return to preparation status automatically. If taboure
type is not selected, the system will continue to use previously used taboure type
automatically.
After hat frame is selected for using, currently selected embroidery card will be rotated
