EM-1010 computerized Embroidery Machine Operation Manual V2.0
43
take breakage detection)
Needle
Of
Cord:
Stitch position using rope embroidery
(automatic deceleration)
0
0-n
Tread
Broken
Sensitivity:
Facial suture breakage detection sensitivity
5
stitches
3-9 stitches, No
T.B Detect at
Jump:
Take breakage detection or not in skipping
stitch embroidery.
No
Yes, No
Auto
Back
When T.B.:
Automatic backing stitches after breakage.
Breakage machine head shall compensate
embroidery in advance
4
0-9
Same ST Auto
Startup:
Take automatic lifting or not when
encountering the same color changing needle
bar.
Yes
Yes, No
Embroidery Parameters 3
Main Axis Max
Speed:
Max rotation speed setting of spindle
(limited by mechanical parameters)
750
550-1200
Main Axis Start
Speed:
Spindle rotation speed at starting
100
60-200
Long Sti. EMB
Mode:
Large stitch used embroidering method
Slow
speed
Slow
speed,
jumping
Auto
Jump
Stitchs:
When large stitch embroidery is skipping,
what’s the stitch to be divided into two
stitches to take embroidering
6.5mm
6.5-8.5mm
Auto
Speed
Down ST:
What’s the stitch to take deceleration
embroidering
2.0mm
2.0-9.0mm
Stitches Value:
What’s the number of stitches to take stitch
variation adjustment
20*
5-20
Speed Down at
Jump:
Decelerated current speed in continuous
skipping
80
％
60
％
-90
％
Sequin
Max
Speed:
Max rotation speed in tinsel embroidery
700
300-1000
Embroidery Parameters 4
Piece Speed: Lifting stepper motor speed adjustment. The 3*
1-4
