EM-1010 computerized Embroidery Machine Operation Manual V2.0
28
part.
In tabouret origin interface, press
key to select operation. The interface will
pop up a dialogue “Please confirm the limit switch is in normal operation.” Press
key to start absolute origin seraching. After seraching is completed, the tabouret
will return to the stop point before searching automatically.
After absolute point is searched, the operation is always valid if the tabouret is not
moved after power failure.
9.3 Set Software Limits
The function is only valid when tabouret setting is “Other”.
In tabouret origin interface, press
key to select operation. The interface pops up
a dialogue “Move tabouret to left upper corner and press OK key.” According to the prompt of
moving tabouret to left upper corner, press
key. The interface pops up a dialogue
“Move tabouret to right upper corner and press OK key.” According to the prompt of moving
tabouret to right upper corner, press
，
press
key and the setting is completed.
Cancel software limit: after entering to software limit interface, don’t move the
tabouret and press
key twice continuously. It will cancel software limit.
