EM-1010 computerized Embroidery Machine Operation Manual V2.0
38
18.3 Spindle Test
In the test interface, press
key to enter into spindle test. Press
key
corresponding to every test item, check whether the output is valid. If corresponding
equipment output has no action, the current output may have fault. Please check and make
maintenance.
XY axis test: Press Up and Down keys to modify the mobile pulse number (1-127) of
motor. The default value is 12 pulses. Press
key to start back and forth movement.
Spindle test: Press
key to start rotation in speed of 100rev / min. Press Up and
Down keys to modify the spindle speed and check whether the current rotation speed is
consistent with actual rotation speed. (within 5 rev difference for 1000 rev).
QEP test: press
key to test spindle coder line number and zero position width.
18.4 Machine Head Test
In the test interface, pres
key to enter into machine head breakage test. Press
figure button to test corresponding needle bar. Check whether breakage detection is valid. If
the pre-out has fault, Please check and make maintenance.
Facial suture test: When facial suture test spring is closed, red indicator is normally on. It
is changed into green when it is separated.
Bottom suture test: Toggle the test wheel. The indicator is flashing along with the toggle
speed.
Select facial suture and bottom suture according to the requirements.
