Ricoh M0A0, Руководство по обслуживанию

Страница: 640 / 776

3.Troubleshooting
14
Code Meaning Suggested Cause/Action
sending to another machine.

Check for line problems.
Cross reference
See error code 0-04.
0-07 No post-message response from the other
end after a page was sent

Check the line connection.

Replace the FCU.

The other end may have jammed or run out of paper.

The other end user may have disconnected the call.

Check for a bad line.

The other end may be defective; try sending to another
machine.
0-08 The other end sent RTN or PIN after
receiving a page, because there were too
many errors
 Check the line connection.
 Replace the FCU.
 The other end may have jammed, or run out of paper or
memory space.
 Try adjusting the tx level and/or cable equalizer
settings.
 The other end may have a defective modem/FCU; try
sending to another machine.
 Check for line problems and noise.
Cross reference
 Tx level - NCU Parameter 01 (PSTN)
 Cable equalizer - G3 Switch 07 (PSTN)
 Dedicated tx parameters in Service Program Mode
0-14 Non-standard post message response code
received
 Incompatible or defective remote terminal; try sending
to another machine.
 Noisy line: resend.
 Try adjusting the tx level and/or cable equalizer
settings.
 Replace the FCU.
Cross reference
See error code 0-08.
0-15 The other terminal is not capable of specific
functions.
The other terminal is not capable of accepting the following
functions, or the other terminal’s memory is full.

Confidential rx

Transfer function

SEP/SUB/PWD/SID
0-16 CFR or FTT not detected after modem

Check the line connection.