SPEED
PART IV DISPLAY PANEL OF THE UNIT
4-5
ENGLISH
Fig. 4.2-1 When the replacement indicator lights are reset
the FILTER or UV LAMP indicator lights will go out.
Fig. 4.2-2 Press the RESET
buttons for 12 times continuously
to reset the replacement indicator
lights.
Fig. 4.2-3 The reset button on the
main circuit board.
4.2 HOW TO RESET THE ACTIVATED CARBON FILTER AND UV LAMP
After replacing the activated carbon filter or UV lamp, you will need to reset them, otherwise the indicator lights will
flash continuously without stopping. In the old model, the unit will automatically shut off until you reset them.
There are two ways to reset the unit.
UV lamps
reset button
Using the remote control
There are RESET1 button (for activated carbon filter reset) and RESET2 button (for UV lamps reset) on the remote
control (Fig. 4.2-2).
To reset activated carbon filter or UV lamp replacement, you need to push the RESET1 for 12 times or press the
RESET2 button 12 times. When the filter or UV lamp is reset you should hear a beep sound from the unit and the
replacement light goes out (Fig. 4.2-1~2).
Note:
When you are trying to reset the FILTER or UV LAMP indicator light the unit must be on.
Activated
carbon filter
reset button
An important notice:
In the new machine (
From ser. # R200xxE
), the "FILTER"
and "UV LAMP" indicator lights will be reset jut pushing the
RESET1 or RESET2 button for 5 times continuously.
Pushing the reset button on the main circuit board
If you do not have the remote control on your hand or you failed to
reset the unit with remote control, you can reset the filter and UV
lamp by pushing the reset button on the main circuit board. Open
the bottom plate of the unit and push the reset button on the circuit
board.
Once press of the reset button will reset the activated carbon filter,
pressing and holding the reset button will reset the UV lamp. If the
carbon filter or UV lamps are reset you can hear a beep sound and
the FILTER or UV LAMP indicator light will stop to flash (Fig. 4.2-3).
For information, see
5.7 FILTER AND UV LAMP RESET
PROBLEM
.
Notice: When you are trying to reset the unit by pushing the
reset button the unit has to be on. Do not touch any parts of
the circuit board or wires with your hands when you push the
reset button on the main circuit board.
Содержание R200T
Страница 69: ...ENGLISH NOTES ...
