RCF MX 9502, Руководство пользователя

Страница: 27 / 60

27
ENGLISH
An input selection (1 ÷ 8) opens an editable signal processing parameter list.
MAIN UNIT LO CUT 5-BAND EQ COMPRESSOR AGC HPL/LPF 3-BAND EQ LEVEL VUMETER
UNIVERSAL IN √ √ √ √ √
AUX IN √ √ √ √
PAGING A √ √ √ √
PAGING B √ √ √ √
BGM 1 √ √ √ √
BGM 2 √ √ √ √
BGM 3 √ √ √ √
MP3 PLAYER √ √ √ √
Choose BOARDS to enter the slave unit list (i.e. UP 950x amplifiers) and select a board
for editing its two local inputs:
1. BGM 3;
2. AUX IN.
Select one of the two local inputs to open an editable signal processing parameter list.
BOARDS LO CUT 5-BAND EQ COMPRESSOR HPL/LPF 3-BAND EQ LEVEL
BGM 3 √ √ √
AUX IN √ √ √ √
LO CUT (hi-pass filter)
Filter that cuts low frequencies below the cutoff frequency.
It has a single parameter: the cutoff frequency.
5-BAND EQ
The first band BAND I LS is a low-shelf filter that increases or decreases the level of all
frequencies below the selected one.
The second band
BAND II PK , the third BAND III PK and the fourth BAND IV PK are
parametric equalizers that allow to adjust the level at the centre frequency and specify
the Q factor.
The fifth band B
AND V LS
is a
hi-shelf
filter that increases or decreases the level of all
frequencies above the selected one.