39
ENGLISH
Select EMRG to enter its respective submenu:
SYS CONFIG > PAG CONS > PAGING x > Paging Console n > BUTTONS FUNCTION
> EMRG
ENABLED:
it enables (On) / disables (Off) the button for the emergency function.
ASSIGN:
it opens a further submenu.
- EVENT MSG:
it sets an evacuation / alert event, in which a message chosen among
the ones on flash memory is played. The message playback is continuous until the event
ends due to a ‘reset’.
- TALK:
it enables (
On
) / disables (
Off
) the microphone (during the message playback).
- DESTINATION:
- USE ZONE BUTT:
it enables (
On
) / disables (
Off
) the zone buttons for emergency
purpose.
- SEL AREA:
it limits the emergency event area to a
ZONE
, a
GROUP
or let it be the
entire system (
ALL
);
NONE:
no selection.
- PRIORITY:
an emergency button can have a priority level different from the paging
microphone setting (lower number: higher priority).
i
N
The
ASSIGN
MeNu
,
SeT
The
Talk
paraMeTer
TO
ON
TO
eNable
The
MicrOphONe
. i
T
iS
aNYwaY
NeceSSarY
TO
puSh
The
pTT
buTTON
TO
TurN
The
MicrOphONe
ON
aNd
STOp
The
MeSSage
ThaT
iS
aSSigNed
TO
aN
eVeNT
(
The
MicrOphONe
haS
higher
priOriTY
ThaN
a
MeSSage
).
T
he
MicrOphONe
TurNS
Off
afTer
a
reSeT
.
DELAY:
it allows to delay actions related to button pressure and release.
It opens a further submenu:
- ACTIVATION TIME:
delay time setting of the start of the function assigned to the
button after its pressure.
- RELEASE TIME:
delay time setting of the end of the function assigned to the button
after its release.
- OVERRIDE:
the assigned function can be cancelled if another button is pressed
(selected in the
MAIN/EXT BUTT
submenu), a main unit logic input is activated (
MAIN
UNIT GPI
), a slave board logic input is activated (
BOARDS GPI
submenu).
GPO TRIG:
assignment of a logic output (GPO) to the emergency button.
Select the logic output of either the main unit (
MAIN UNIT GPO
submenu) or a slave
board (
BOARDS GPO
submenu).
Select
GEN CALL
to enter its respective submenu:
SYS CONFIG > PAG CONS > PAGING x > Paging Console n > BUTTONS FUNCTION
> GEN CALL
SEL AREA:
general call button paging area selection. It can be either a specific zone (ZONE
submenu), a group (
GROUP
), all system zones (
ALL ZONE SYS
) or only those configured
in the paging microphone (
ALL ZONE PAG
).
GPO TRIG:
assignment of a logic output (GPO) to the general call button.
Select the logic output of either the main unit (
MAIN UNIT GPO
submenu) or a slave
board (
BOARDS GPO
submenu).
Select
PTT BUTT
, to enter a single function:
SYS CONFIG > PAG CONS > PAGING x > Paging Console n > BUTTONS FUNCTION
> PTT BUTT
GPO TRIG:
assignment of a logic output (GPO) to the PTT button.
Select the logic output of either the main unit (
MAIN UNIT GPO
submenu) or a slave
board (
BOARDS GPO
submenu).
Содержание MX 9502
Страница 2: ......
