RCF MX 9502, Руководство пользователя

Страница: 30 / 60

30
ENGLISH
VOLUME Adjusts the max. level (manual limiter).
DECAY Adjusts the AGC release rate.
CURVE
Mode selection:
-
Mode 1
- Mode 2
BYPASS Select either
On
(AGC bypassed) or
Off
(AGC inserted).
PARAMETERS
PARAMETERS
PARAMETERS
HPF / LPF (hi-pass filter, low-pass filter)
The hi-pass filter (HPF) cuts low frequencies (below its cutoff frequency), the low-pass
filter (LPF) cuts high frequencies (above its cutoff frequency).
FREQ HPF Setting of the hi-pass filter cutoff frequency.
FREQ LPF Setting of the low-pass filter cutoff frequency.
BYPASS Select either ON (filters bypassed) or OFF (filter inserted).
3-BAND EQ
The first band BAND I LS is a low-shelf filter that increases or decreases the level of all
frequencies below the selected one.
The second band
BAND II PK is a parametric equalizer that allows to adjust the level at
the centre frequency and specify the Q factor.
The third band
BAND III LS is a hi-shelf filter that increases or decreases the level of all
frequencies above the selected one.
BAND I LS
FREQ Frequency setting.
GAIN Gain setting (for frequencies below the selected one).
BAND II PK
FREQ Centre frequency setting.
GAIN Gain setting.
Q
Q factor: a higher value corresponds to a narrower
bandwidth.
BAND III HS
FREQ Frequency setting.
GAIN Gain setting (for frequencies above the selected one).
BYPASS EQ Select either ON (equalizer bypassed) or OFF (equalizer inserted).
LEVEL
It adjusts the audio input level.
VUMETER
Input signal level indicator.