RCF MX 9502, Руководство пользователя

Страница: 24 / 60

24
ENGLISH
Menu that allows to act on an event with priority in progress (evacuation, alert) or a fault
and start playing a message manually.
RESET: it stops the current event and removes all visual (LED, display) and audio signals. It
resets a fault.
SILENT: it stops the audio signal playback matched to the event in progress, but not
before its normal ending (the event is fully played at least once).
REACTIVATE: it resumes the playback of the audio signal matched to the event in
progress.
LIVE MESSAGE (message playback manual activation): choose both a source (press a key
on the left of the display) among SRC 1–2–3 and a destination (press a key on the right
of the display) among DEST 1–2–3. After selecting, the message playback will start. Press
ESC
2 to stop.
N
OTe
:
SOurceS
/
deSTiNaTiONS caN ONlY be SeT bY The dedicaTed
pc
SOfTware
.
T
he OpTiONS NOT SelecTable are barred
(
deleTed wiTh a liNe
).
EVENT MENU
DISABLE-SURV MENU
It is possible to disable system devices, execute amplifier calibrations and set spare
amplifiers.
SUBMENU DESCRIPTION
1 DISABL LIST List of all disabled peripherals.
2 DISABL
Disable either a group or a zone or a single peripheral.
It inhibits the operation of a device to prevent a error messages during maintenance.
3 CALIBRAT Calibration of each single amplifier.
4 SET SPARES Spare amplifier settings.
5 MATCH SPRS
It matches one or more amplifiers (normally used) to a spare one.
In case of simultaneous failure of several amplifiers, only the one physically closest (in the
chain) is replaced by the spare.