RCF MX 9502, Руководство пользователя

Страница: 20 / 60

20
ENGLISH
49
24 V DC: 24 V dc output, max. 100 mA.
50
GENERAL PURPOSE OUTPUTS
8 logic outputs (relay dry contacts, removable connectors).
Each logic output has two resistors that can be inserted by setting the respective jumper
(JP1 to JP8) to the
AB
position. These two resistors are necessary when the logic output
(
GPO
) is linked to a logic input (
GPI
) of another device and the line monitoring is
required.
The first resistor (470 Ω) is used to get the
ACTIVE
state, the second (10 kΩ) to get the
IDLE state.
If a jumper is set to the BC position, the two resistors are overridden (the internal relay
contact is directly connected).
i
NTerNal juMper SeTTiNg NeedS TO be carried OuT direcTlY bY eiTher
rcf
Or aN auThOriSed SerVice
ceNTre
.
WARNING: dO NOT
direcTlY pOwer a lOgic OuTpuT
( GPO )
wheN The reSpecTiVe iNTerNal juMper
iS SeT TO The
AB
pOSiTiON
(
iNSerTed reSiSTOrS
),
aS The Max
.
curreNT iS ONlY
25 mA . i
f The juMper iS
SeT TO The
BC
pOSiTiON
,
The Max
.
curreNT iS
0.3 a. MAX APPLICABLE VOLTAGE : 24 V
dc
.
51
SPARE AMP BUS – INPUT
Input to link the spare amplifier 100 V / 70 V output.
52
SPARE AMP BUS – OUTPUT
If the amplifier is not faulty (and so the spare amplifier is not inserted), this 100 V / 70 V
output is directly linked to the
SPARE AMP BUS – INPUT
51
and can be used to
connect a dummy load.
53
a (MX 9502) SPEAKER LINE OUT
Two 100 V / 70 V loudspeaker line outputs (
LINE A1
and
LINE A2
) of the internal
amplifier channel A (250 W).
53
b (MX 9502) SPEAKER LINE OUT
Two 100 V / 70 V loudspeaker line outputs ( LINE B1 and LINE B2 ) of the internal
amplifier channel B (250 W).
53 a
(MX 9504) SPEAKER LINE OUT
100 V / 70 V loudspeaker LINE A output of the internal amplifier channel A (125 W).
53
b
(
MX 9504) SPEAKER LINE OUT
100 V / 70 V loudspeaker
LINE B
output of the internal amplifier channel B (125 W).
53
c (MX 9504) SPEAKER LINE OUT
100 V / 70 V loudspeaker LINE C output of the internal amplifier channel C (125 W).
53 d
(MX 9504) SPEAKER LINE OUT
100 V / 70 V loudspeaker LINE D output of the internal amplifier channel D (125 W).
GPO
B
C
JP 1 ÷ 8
10k
470
A
AC VOLTAGE SELECTOR
AND FUSE INSIDE,REFER
TO INSTRUCTION MANUAL
WARNING
TO REDUCE THE RISK
OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION
SERIAL NUMBER
GENERAL PURPOSE OUTPUTS
1 2 3 4 5 6 7 8
+ - + - + - + - + - + - + - + -
RELAY OUTPUTS (contact load 0,3A - 24V DC)
BGM 3 AUX INPUT
GND
PAGING IN 2 PAGING IN 1
FALL BACK INPUT
CMD
GND
AUDIO
GENERAL PURPOSE INPUTS
Max 100 mA
1 2 3 4 5 6 7 8 9 10 11 12
PHOTO-COUPLED INPUTS MONITORED INPUTS
24V DC
ROUTINE MESSAGES ETHERNET
M
ADE IN I
TA
LY
MOH
MONITOR OUT
AUX OUT
MAIN IN BGM 2 BGM 1
GND
GND 28V GND
BUS IN BUS OUT
FLEXCOM BUS CTRL RS485
1 2 3 4 1 2 3 4
MX
2x250W MASTER UNIT
POWER
115/230V ~ 50-60Hz - 60 W max
48 V
15 A max
EN54-16
COMPLIANCE STICKER
MAX OUTPUT POWER 500 W RMS
MINIMUM LOAD IMPEDANCE
70 V (20 ) - 100 V (40 )
+ - + - + - + - + - + - + - + -
Series
SPEAKER LINE OUT
LINE A1 LINE A2
- + - + - + - +
LINE B1 LINE B2
SPARE AMP BUS
INPUT
- + - +
OUTPUT
AC VOLTAGE SELECTOR
AND FUSE INSIDE,REFER
TO INSTRUCTION MANUAL
WARNING
TO REDUCE THE RISK
OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION
SERIAL NUMBER
GENERAL PURPOSE OUTPUTS
1 2 3 4 5 6 7 8
+ - + - + - + - + - + - + - + -
RELAY OUTPUTS (contact load 0,3A - 24V DC)
BGM 3 AUX INPUT
GND
PAGING IN 2 PAGING IN 1
FALL BACK INPUT
CMD
GND
AUDIO
GENERAL PURPOSE INPUTS
Max 100 mA
1 2 3 4 5 6 7 8 9 10 11 12
PHOTO-COUPLED INPUTS MONITORED INPUTS
24V DC
ROUTINE MESSAGES ETHERNET
M
ADE IN I
TA
LY
MOH
MONITOR OUT
AUX OUT
MAIN IN BGM 2 BGM 1
GND
GND 28V GND
BUS IN BUS OUT
FLEXCOM BUS CTRL RS485
1 2 3 4 1 2 3 4
MX
1x125W MASTER UNIT
POWER
115/230V ~ 50-60Hz - 60 W max
48 V
15 A max
EN54-16
COMPLIANCE STICKER
MAX OUTPUT POWER 500 W RMS
MINIMUM LOAD IMPEDANCE
70 V (20 ) - 100 V (40 )
+ - + - + - + - + - + - + - + -
Series
SPEAKER LINE OUT
LINE A LINE B
- + - + - + - +
LINE C LINE D
SPARE AMP BUS
INPUT
- + - +
OUTPUT
AC VOLTAGE SELECTOR
AND FUSE INSIDE,REFER
TO INSTRUCTION MANUAL
WARNING
TO REDUCE THE RISK
OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION
SERIAL NUMBER
GENERAL PURPOSE OUTPUTS
1 2 3 4 5 6 7 8
+ - + - + - + - + - + - + - + -
RELAY OUTPUTS (contact load 0,3A - 24V DC)
BGM 3 AUX INPUT
GND
PAGING IN 2 PAGING IN 1
FALL BACK INPUT
CMD
GND
AUDIO
GENERAL PURPOSE INPUTS
Max 100 mA
1 2 3 4 5 6 7 8 9 10 11 12
PHOTO-COUPLED INPUTS MONITORED INPUTS
24V DC
ROUTINE MESSAGES ETHERNET
M
ADE IN I
TA
LY
MOH
MONITOR OUT
AUX OUT
MAIN IN
BGM 2 BGM 1
GND GND 28V GND
BUS IN
BUS OUT
FLEXCOM BUS CTRL RS485
1 2 3 4 1 2 3 4
MX
2x250W MASTER UNIT
POWER
115/230V ~ 50-60Hz - 60 W max
48 V
15 A max
EN54-16
COMPLIANCE STICKER
MAX OUTPUT POWER 500 W RMS
MINIMUM LOAD IMPEDANCE
70 V (20 ) - 100 V (40 )
+ - + - + - + - + - + - + - + -
Series
SPEAKER LINE OUT
LINE A1 LINE A2
- + - + - + - +
LINE B1 LINE B2
SPARE AMP BUS
INPUT
- + - +
OUTPUT