RCF MX 9502, Руководство пользователя

Страница: 49 / 60

49
ENGLISH
JP1 to JP8
AB position: the two resistors for monitoring are
inserted in the respective logic output (GPO).
BC
position: the two resistors for monitoring are not
inserted (‘dry contact’) in the respective logic output
(GPO).
JP 9
Jumper inserted (ON): normal operation of the first logic
input (GPI 1), which can be connected to a dry closing
contact. Jumper removed (OFF): the first logic input (GPI 1) can
be linked to an external device having its own output
voltage.
JP 10
Jumper inserted (ON): normal operation of the second
logic input (GPI 2), which can be connected to a dry
closing contact. Jumper removed (OFF): the second logic input (GPI
2) can be linked to an external device having its own
output voltage.
IMPORTANT:
iNTerNal juMper SeTTiNg Shall be carried OuT ONlY bY eiTher
rcf
Or aN auThOriSed
SerVice ceNTre
.
Remove the lid and look at the back GPI / GPO board (in this drawing, the 10 jumpers
are marked in grey inside the rectangle):
INTERNAL JUMPER SETTINGS
ZOOM: