44
ENGLISH
SYS CONFIG >
REM-N&D SUBMENU
SYS CONFIG > REM-N&D SUBMENU
This submenu allows to:
-
Set system peripherals, but those managed separately, such as paging microphones.
-
Edit 'Night and Day' volume presets.
Enter to see the following lists:
- REM CTRL:
remote (volume and programme) controls. Note: this function is currently
disabled and will be available in future software releases.
- N&D PRESET:
'Night and Day' volume preset settings.
- NOISE DETECT:
ambient noise detectors.
N
OTe
:
ThiS
fuNcTiON
iS
curreNTlY
diSabled
aNd
will
be
aVailable
iN
fuTure
SOfTware
releaSeS
.
'Night & Day' volume preset selection is not (of course) a peripheral, but an operating
mode setting that changes paging and background music volume in predetermined times
or due to logic input (GPI) activations.
It is possible to store (and load) up to 32 'Night and Day' presets.
Select a 'Night and Day' preset (
N & D PRESET
) to enter its respective submenu:
SYS CONFIG > REM-N&D > N & D PRESET > Preset N&D xx
SEL AREA:
area selection affected by the 'Night and Day' preset, chosen among the
entire system (
ALL
), a group (
GROUP
), a zone (
ZONE
);
NONE:
no selection.
CONFIG:
enter to access other three submenus.
SET PRIO
Priority level setting (lower number: higher priority).
PERIODIC
TIME
START TIME
‘Night and Day’ function start time setting.
STOP TIME
‘Night and Day’ function stop time setting.
SCHEDULE
Play Daily
Daily ‘Night and Day’ function.
Play Weekly
Weekly ‘Night and Day’ function.
Mo to Fr
‘Night and Day’ function only on working days (Monday to Friday).
Sa & Su
‘Night and Day’ function only on Saturdays and Sundays.
Mondays
‘Night and Day’ function only on Mondays.
Tuesdays
‘Night and Day’ function only on Tuesdays.
Wednesdays
‘Night and Day’ function only on Wednesdays.
Thursdays
‘Night and Day’ function only on Thursdays.
Fridays
‘Night and Day’ function only on Fridays.
Saturdays
‘Night and Day’ function only on Saturdays.
Sundays
‘Night and Day’ function only on Sundays.
ENABLE
On:
‘Night and Day’ function enabled,
Off:
‘Night and Day’ function disabled.
LEVELS
For each 'Night and Day' preset, it is possible to adjust (through submenus) its levels:
BGM VOL (background music), PAG VOL (paging), EMERG VOL (emergency messages),
ROUTINE VOL (routine messages).
EMERG VOL refers to these messages: EVAC (evacuation), ALERT, ALL-CLEAR and TEST,
which are stored to a flash memory and cannot be edited.
ROUTINE VOL refers to routine messages stored to SD cards (that can be modified).
Содержание MX 9502
Страница 2: ......
