Rauch AXENT 100.1, Дополнительные инструкции

Страница: 59 / 114

See also 5.1.1 Overloading in automatic operating mode and 6.1 Overloading .
n
Manual (AXIS-PowerPack only)
CAUTION!
Risk of slipping and environmental damage due to ejected fertiliser
If overloading is active, overflow in the fertiliser spreader may occur and excessive fertiliser may
leak unexpectedly from the hopper.
Persons may slip and be injured.
Risk for the environment.
u
Make sure nobody is present in the spreading zone of the machine before switching on the
spreading discs.
u
Activate the Manual mode briefly in exceptions.
u
Use the Automatic mode if possible.
u Access the menu Machine settings.
u Select the Manual mode menu item.
Warning message no. 39 is displayed. See 7.1 Meaning of the alarm messages.
u Press ACK.
The warning message is acknowledged.
The box is checked: The operating mode is active.
u Press the Start overloading key.
Overloading is started.
Overloading is implemented in the same sequence as for the Automatic mode operating mode.
u Press the Start overloading key.
Overloading is stopped.
• See also 5.1.2 Overloading in manual operating mode .
4.7.4 Settings for lime operation
When starting the machine control unit, the attached lime spreading unit is automatically detected and
the machine control unit switches to lime operation.
Lime operation is speed-dependent: The speed of the conveyor belt and opening of the pre-metering
slide are automatically adjusted to the forward speed to ensure even lime spreading.
4. Operation
AXENT ISOBUS 5901646
59