Rauch AXENT 100.1, Дополнительные инструкции

Страница: 52 / 114

• If the flow factor is increased , the dosing quantity is reduced
• If the flow factor is reduced , the dosing quantity is increased
An error message is displayed if the flow factor is outside the preset range. See chapter 7.1 Meaning
of the alarm messages .
Entering the flow factor:
u Access the menu Fertiliser settings > Flow factor.
The currently set flow factor is displayed.
u
Enter the value obtained from the fertilizer chart into the input field.
Application rates at 10 km/h and 30 cm pre-metering slide opening
Lime type
Density
(kg/m³)
Grinding
stage
Flow factor
Dry substance
(%)
Working
width (m)
Application
rate
max.
(kg/ha)
Burnt lime, ground 1100 1 0.88 100 10 9700
Burnt lime,
granulated
1100 - 0.88 100 18 5380
Converter lime 1300 2 1.04 90 15 7640
Carbonated lime 1000 - 0.80 72 12 7340
Mixed lime 1100 2 0.88 88 12 8080
Calcium carbonate 1200 2 0.96 92 12 8810
Magnesium lime 1100 1 0.88 94 10 10580
Black lime 900 1 0.72 83 12 6610
For lime types which do not appear in the list, it is possible to calculate the flow factor with the formel
below
• Flow factor (FF) = Density (kg/liter) x 0.8
Minimum factor
The machine control unit automatically sets the minimum factor to one of the following values,
depending on the entered value:
• The minimum factor is 0.2 if the entered value is less than 0.5
• The minimum factor is 0.4 if you enter a value over 0.5.
4. Operation
52
5901646 AXENT ISOBUS