Rauch AXENT 100.1, Дополнительные инструкции

Страница: 98 / 114

Fig. 50: Distance on (measured from field border)
A Turn on distance C Field border
If you want to change the switch-on position in the field, you need to adjust the Turn on dist. (m) value.
• A lower value for this distance means that the switch-on position is closer to the field border.
• A greater value means that the switch-on position is closer to the center of the field.
n
Turn off distance (m)
The Turn off dist. (m) parameter refers to the turn off distance [B] measured from the field border [C].
At this position in the field, the metering slides start to close.
5. Spreading operation with AXIS-PowerPack
98
5901646 AXENT ISOBUS