Rauch AXENT 100.1, Дополнительные инструкции

Страница: 107 / 114

No. Message in display Meaning and possible cause
52 Error at hopper cover The position of the hopper cover could not
be reached.
• Blockage
• Defective actuator
53 Defect at hopper cover The hopper cover actuator cannot reach the
target value for the movement.
• Blockage
• Defective actuator
57 Error at hopper cover The hopper cover actuator cannot reach the
target value for the movement.
• Blockage
• No position feedback
71 Impossible to reach disc speed The spreading disc speed is not within the 5 %
target range.
• Problem with oil supply
• Proportional valve spring is jammed.
72 Error at SpreadLight Power supply is too high; the operating lights
will be switched off.
73 Error at SpreadLight Overload
74 Defect at SpreadLight Connection error
• Defective cable
• Loose plug connector
75 Conveyor belt speed could not be reached The conveyor belt has not reached the target
speed within 5 s.
76 Error at left pre-metering slider cylinder The position at the right pre-metering slide
could not be reached.
• Blockage
• Hydraulics cylinder defective
77 Error at right pre-metering slider cylinder The position at the right pre-metering slide
could not be reached.
• Blockage
• Hydraulics cylinder defective
78 AXENT empty The hopper is empty.
7. Alarm messages and possible causes
AXENT ISOBUS 5901646
107