Rauch AXENT 100.1, Дополнительные инструкции

Страница: 83 / 114

5 Spreading operation with AXIS-PowerPack
5.1 Overloading
5.1.1 Overloading in automatic operating mode
Overloading is fully automatic and always in the same sequence.
The sensor conditions and overloading can be observed on the operating screen. However, the
messages are displayed without sound.
Requirement:
• The automatic operating mode is active.
○
See 4.7.3 Overloading function operating mode
Function/control Operating screen display
u Press Spreading disc start.
The conveyor belt starts up.
The pre-metering slides open automatically.
The PowerPack container fills up. Once the maximum
filling quantity is reached, the belt stops automatically.
u
Spreading operation start.
u Start spreading.
The overload runs continuously depending on the spread
quantity. The belt speed and pre-metering setting are
automatically adjusted.
5. Spreading operation with AXIS-PowerPack
AXENT ISOBUS 5901646
83