R&S ZNH, Руководство пользователя

Страница: 230 / 369

Remote Commands
R&S
®
ZNH
223 User Manual 1334.5985.02 ─ 02
Parameters:
<Detector> POSitive | NEGative | SAMPle | RMS | AVERage | APEak
*RST:
APE
For more information, see chapter "Detectors".
Example: DET POS
Sets the primary detector to "positive peak".
[SENSe:]DETector<1...2>[:FUNCtion]:AUTO <State>
This command couples and decouples the detector to the trace mode.
The numeric suffix at DETector specifies the primary or secondary detector.
Parameters:
<State> ON | OFF
*RST:
ON
Example: DET:AUTO OFF
Turns off automatic detector selection for the primary detector.
12.6.2.6 Using Markers and Deltamarkers
Markers and Deltamarkers
The following commands control the operation of marker, delta markers and marker
functions.
List of commands
●
CALCulate<1...2>:DELTamarker<1...6>[:STATe]
on page 254
●
CALCulate<1...2>:DELTamarker<1...6>:AOFF
on page 254
●
CALCulate<1...2>:DELTamarker<1...6>:MAXimum[:PEAK]
on page 254
●
CALCulate<1...2>:DELTamarker<1...6>:MAXimum:NEXT
on page 255
●
CALCulate<1...2>:DELTamarker<1...6>:MINimum[:PEAK]
on page 255
●
CALCulate<1...2>:DELTamarker<1...6>:X
on page 255
●
CALCulate<1...2>:DELTamarker<1...6>:X:RELative
on page 256
●
CALCulate<1...2>:DELTamarker<1...6>:Y?
on page 256
●
CALCulate<1...2>:MARKer<1...6>[:STATe]
on page 257
●
CALCulate<1...2>:MARKer<1...6>:AOFF
on page 257
●
CALCulate<1...2>:MARKer<1...6>:MAXimum[:PEAK]
on page 258
●
CALCulate<1...2>:MARKer<1...6>:MAXimum:NEXT
on page 258
●
CALCulate<1...2>:MARKer<1...6>:MINimum[:PEAK]
on page 258
●
CALCulate<1...2>:MARKer<1...6>:MODE
on page 259
●
CALCulate<1...2>:MARKer<1...6>:X
on page 259
Remote Control - Commands