R&S ZNH, Руководство пользователя

Страница: 225 / 369

Remote Commands
R&S
®
ZNH
218 User Manual 1334.5985.02 ─ 02
Example: UNIT:POW DBM
Sets the power unit to dBm.
12.6.2.3 Setting the Bandwidth
The following commands configure the filter bandwidths of the R&S ZNH. Note that
both groups of commands (
BANDwidth
and
BWIDth
) are the same.
List of commands
●
[SENSe:]BANDwidth|BWIDth[:RESolution] <MeasBW>
●
[SENSe:]BANDwidth|BWIDth[:RESoultion]:AUTO <State>
For a detailed description of the commands, see Setting the Bandwidth in CAT mode.
12.6.2.4 Performing and Triggering the Measurements
The following commands control the actual measurement process.
List of commands
●
*WAI
on page 209
●
ABORt
on page 218
●
INITiate[:IMMediate]
on page 219
●
INITiate:CONTinuous
on page 219
●
[SENSe:]SWEep:COUNt
on page 219
●
[SENSe:]SWEep:POINts
on page 220
●
[SENSe:]SWEep:TIME
on page 220
●
[SENSe:]SWEep:TIME:AUTO
on page 220
●
TRIGger[:SEQuence]:HOLDoff[:TIME]
on page 220
●
TRIGger[:SEQuence]:SLOPe
on page 221
●
TRIGger[:SEQuence]:SOURce
on page 221
For a detailed description of the commands not described below, see Common Com-
mands .
ABORt
This command aborts the current measurement and resets the trigger system.
This command is an event and therefore has no query and no *RST value.
Example: ABOR;
INIT:IMM
Aborts a measurement and starts a new one.
Usage: Event
Remote Control - Commands