R&S ZNH, Руководство пользователя

Страница: 296 / 369

Remote Commands
R&S
®
ZNH
289 User Manual 1334.5985.02 ─ 02
Parameters:
<FileName> String containing the filename.
Example: MMEM:NAME 'Public\Screeshots\Test.png'
Stores the screenshot in the corresponding directory on the
R&S
ZNH.
12.6.7 Configuring Data Capture
The following commands configure the data capture.
These commands are independent from the operating mode.
List of commands
SYSTem:CAPTure:COUNter
........................................................................................... 289
SYSTem:CAPTure:DATaset[:STATe]
.................................................................................289
SYSTem:CAPTure:MODE
...............................................................................................289
SYSTem:CAPTure:SCReen[:STATe]
................................................................................ 290
SYSTem:CAPTure:COUNter <CaptureCounter>
This command defines the start of the filename counter.
The counter numbers the files stored when you capture data (screenshots, datasets
etc.).
Parameters:
<CaptureCounter> String containing the number with which to start numbering files.
*RST:
'0000'
Example: SYST:CAPT:COUN '0100'
Starts numbering files with 0100, e.g. Measurement0100.png.
SYSTem:CAPTure:DATaset[:STATe] <State>
This command includes or excludes datasets from the data capture.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: SYST:CAPT:DAT ON
Includes datasets into the data capture.
SYSTem:CAPTure:MODE <CaptureMode>
This command selects the data types that the R&S ZNH saves when you capture the
current measurement data.
Parameters:
<CaptureMode> SCReen | DATaset | BOTH
Remote Control - Commands