Instrument Functions
R&S
®
ZNH
83
User Manual 1334.5985.02 ─ 02
A drop-down menu opens to select the user calibration data.
8. Select "On" to apply user calibration data or "Off" to discard calibration data after
preset.
Depending on the selection , the R&S
ZNH loads or discards the calibration data
after preset.
5.5
Configuring Measurements
dialog box provides an overview of the current configura-
tion of the R&S
ZNH. In addition, you can also change the configuration in this dialog
box.
1. Press [SETUP] key.
2. Select "Config Overview" softkey.
3. Select one of the dialog boxes and change the settings as you like.
Note that the contents of the "Config Overview" dialog box are customized for each
operating mode of the R&S
ZNH. Therefore, the order and number of displayed set-
tings are different in each mode.
5.6
Working Directory
Using the "Working Directory", you can customize the folder directory to save the
screenshots and datasets captured during measurement.
1. Press [SETUP] key.
2. Select "User Preference" softkey.
3. In the "User Preferences" dialog box, select the "Using working directory" item.
4. Select "On" to activate the customize folder directory or "Off" to use the default
storage device in the R&S
5. Define the folder name in the "Working directory" item.
Working Directory
