RADWAG PUE HY10, Руководство пользователя

Страница: 33 / 305

33
15.2. ETHERNET setting
Procedure:
•
Enter < Communication> according to ch.15 of the manual,
select < Ethernet> and then set an appropriate value.
Following settings are accessible for Ethernet:
•
DHCP - Yes – No
•
IP Address - 192.168.0.2
•
Subnet Mask - 255.255.255.0
•
Default gateway - 192.168.0.1
•
DNS - 192.168.0.1
•
MAC Address - ---
Caution:
1. The above settings are presented for information purpose only.
Transmission parameters have to be selected in accordance with
client’s local network settings.
2. Parameter <MAC Address> is automatically assigned to a device
and it is has <Read only> Attribute.
3. In case of declaring the <DHCP> parameter to value and on device
restart, the other transmission parameters have <Read only> attribute.
•
After making changes press key, then a new message is displayed:
<Restart to apply the changes> ,
•
Go back to weighing and restart the device.
15.3. TCP protocol setting
TCP
(Transmission Control Protocol) is a protocol for communication
between two computers. It operates in mode client-server. Server awaits
on connection initiation on a specified port while client initiates connection
to the server. Scale software allows setting the port for the
„Tcp” protocol.