RADWAG PS 3000.R2, Руководство пользователя

Страница: 189 / 191

- 189 -
23. UNDER PAN WEIGHING
In standard solutions loads can be weighed under a weighing pan. Such means
of operation require placing a balance in an uplifted position. RADWAG offers a
rack for under-pan weighing. The rack is an optional equipment.
For under-pan weighing follow below procedure:
• Remove plastic hole plug located in balance basis,
• Under the plug you can find a special holder with an opening dedicated
for suspending the load (fixed permanently),
• The opening is used for fixing a hook intended for either load or a
dedicated weighing pan, once depositing a load one can start
weighing,
• Upon completing under pan weighing, put the plastic plug back onto its
place.
CAUTION
The suspension for hook must not be turned, twisted or manipulated
in any direction. Such actions may cause damage to balance
mechanism.
Mass of all additional elements of under pan weighing kit, like, the hook,
weighing pan, string, etc. should be zeroed by pressing or .